※采用集成化一體式微電腦控制系統，小體積，不占空間，低功率高效能，節 能減碳設計。

※系統界面配置權限設置操作鎖定，免除操作人員的參數設置誤動。

※涂布輪運轉速度與出膠速度采比例控制，可依生產需求調整上膠均勻，降低 人員調試時間。

※上膠厚度均勻穩定，可微調范圍設置于0.05mm-1.5mm之間。

※自動檢測膠槽剩膠量，做低膠量警報提示加膠。

※設備系統可設置涂布總成自動清洗/手動強制清洗，杜絕人員下班休息時疏忽 忘記清洗

※膠槽高氣備^性設計，停機時膠槽剰余膠水可保持7-12day再開機使用。

※可依現場實際需求：1 .加裝UPS備用電源（備工廠停電時緊急清洗）

2. 加裝涂膠槽上方煙霧過濾器（不同膠水/產生的煙霧）

3. 訂制涂布輪（壓花紋路、光面...等）

Integrated microcomputer control system, small size, no space, low power and high efficiency, section Can reduce carbon design.

 System interface configuration authority set operation lock, eliminating th? operator's parameter settings malfunction.

Coat wheel running speed and the rate of injection ratio control, according to production needs to adjust the glue evenly,Personnel debugging time. Uniform thickness of the glue on the fine-tuning range can be set between 0.05mm-1.5mm.

Automatic detection of plastic residue left volume, do low-volume alarm tips plus glue.
 Equipment can be set to install the asse mbly assembly automatic cleaning/manual forced cleaning, to prevent staff from work to neglect Forget to clean.

Glue tank high air tightness design, stop the glue tank remaining glue can be maintained 7-12day and then boot.

According to the actual needs of the scene:

1. Install UPS standby power (emergency shutdown when the factory power failure)

2. Install the smoke filter above the glue tank (different glue / generated smoke)

3. Custom coated wheel (embossed lines, smooth ... Etc.)