 HASHIMA（羽島）株式會社中國總代理 日本原裝生產 羽島（昆山）產業機器有限公司中國代理店 上海青木實業發展有限公司 上海羽島貿易有限公司 HASHIMA(羽島)株式會社柬埔寨總代理 青木實業針車（柬埔寨）有限公司 HASHIMA(羽島)株式會社緬甸總代理 青木實業針車（緬甸）有限公司 符合日本PL法的檢針機！ HN-770G為美國GAP專用！ 羽島HASHIMAハシマ輸送式檢針機HN-670C/680C/770G 精密的檢針精度、簡便的檢測模式 靈敏度模式、節能模式及診斷模式設定  HN-670C檢針機  HR-5050翻轉裝置
| 產品名稱 | 傳送式檢針機 | | 型號 | HN-670C | HN-680C | HN-770G | | 檢知方式 | 磁力誘導方式 | | 檢測傳感度 | 直徑0.8毫米的鐵球以上 | | 檢知寬度 | 600毫米 | | 檢知高度 | 100毫米（標準品） | | 警報方式 | 鳴響 | | 使用電源 | 單相 | | 機械尺寸 | 1050×1650×920毫米 | | 重量 | 約250kg | | 導向裝置 | 標準裝置 | | 良品計數器 | 標準裝置 | | 特點 | 新設計數字式電路……一改以往的模擬處理
大型藍屏頁晶顯示器……采用大型藍屏液晶顯示器，機器操作方便可非常直觀的顯示各種數據。
精密的靈敏度設定……將以往的10級靈敏度更改為100級，使機器實現更為精密的靈敏度設定。
增加了新的檢測模式，在以往無法使用的工廠環境中仍可正常作業。（申請中）
配備有重起功能……不需要重復的手動啟動機器，在一定的間隔時間內機器會自動啟動。此功能可使檢測工作非常順利的進行。
節能設計……控制電能的無味消耗，為地球環境的可持續發展而變化。
各種診斷模式，使機器的可信性得到了很大的提升……自診斷模式即為，線圈斷線情況下信號輸出衰減的自診斷、“維護者”模式下外界干擾有無的判斷，使機器的維修、保養工作變得非常容易。
檢針作業過程的存儲……配備了大容量的存儲器，使檢針作業過程得以保存。在檢針作業管理方面，若有效的使用此存儲功能，可大大提高檢針作業的精準性。另外，通過連接數據讀取器或電腦提取檢針過程數據，使本機得到更廣泛、有效的使用。（選配）
| | 可選裝配 | 檢測高度140MM：可檢出鐵球直徑1.0MM；
檢測高度180MM：可檢出鐵球直徑1.2MM | （該款機型已停產，現款型號為HN-870C) 收購羽島HASHIMA各類二手檢針機，免費估價，高價收購！ | 検針機＞コンベア検針機＞HN-670C,680C |  | | | | |  | LCD |  | | Control Panel |  | | Main Power Switch |  | | | MODEL | HN-670C,680C | | DETECTION METHOD | Magnetic induction | | DETECTION ABILITY | Φ0.8mm steel to small scissors | | DETECTION ADJUSTMENT | Step-less | | DETECTION WIDTH | 600mm | | DETECTION HEIGHT | 100mm (Standard type) | | ALARM METHOD | Buzzer , Lamp | | BELT SPEED | (approx.) 40m/min | | POWER SUPPLY | Single phase | | RATED OUTPUT | (approx.) 140W | | DIMENSIONS | 1,050(L)×1,650(W)×920(H)mm | | WEIGHT | (approx.) 250kg | | FEATURES | ●Blue LCD
New conspicuous blue LCD indicates detecting positions,detection signal levels from each coil and more infomation.
●φ0.8mm
This machine has adopted new design detecting sensor so that φ0.8mm is available at Detecting 100mm height. It promises to increase detecting accuracy.
●30% up
New design detecting sensor has also good noise performance that is increased about 30% than previous model.
●30% up
The detecting sensitivity is more stable in the detecting area. The new model gets more stable result against NC products than before.(100 mm height)
●Sensitivity level monitor
New designed level monitor is more easy to check the sensitivity level and detecting position lamp is divided to 10 pieces that shows foreign object exactly.
●Return device
This machine has return device that the products return to a operator after making alarm when the machine detects foreign object in a products.
●40m/min (50/60Hz)
This belt speed that connect to detecting speed is on this class.
●Data collection
The detecting result is able to collected to your computer by optional software from the needle detector. The collected data can be used for analyzing.
●Counter/Product guider
These devices are option equipments | | STANDARD | Foot Switch. | | OPTION | COUNTER , PRODUCT GUIDER | |  |  |  | | | MODEL | HN-770G | | DETECTION METHOD | Magnetic induction | | DETECTION ABILITY | 0.8mm steel to small scissors | | DETECTION ADJUSTMENT | Step-less | | DETECTION WIDTH | 600mm | | DETECTION HEIGHT | 100mm | | ALARM METHOD | Buzzer, Lamp, Belt stop | | BELT SPEED | About 40m/min | | POWER SUPPLY | Single phase | | RATED OUTPUT | (approx.) 140W | | DIMENSIONS | 1,050(L)×1,650(W)×920(H)mm | | WEIGHT | (approx.) 250kg | | FEATURES | 1. DIGITAL PROCESSING
Our older needle detectors perform signal as analog circuit. A newly designed digital PC board has enabled reduction of magnetic disturbance and increased the stability of needle detecting performance by the digital processing.
2. LARGE-SIZED LCD
The blue LCD has improved the visibility and operatively, compared to our previous models. This has enabled various settings such as the sensitivity, language mode and etc., and can be showing current condition of the machine on the display too.
3. PRECISE SENSITIVITY ADJUSTMENT
Increased sensitivity steps from 10 to 101. So, the best sensitivity can be set for respective garments.
4. LOW SPEED MODE (Additional function)
By lowering conveyor belt speed, accessories which are unstable quality can be inspected without causing wrong detection with high sensitivity.(* vary among different accessories)
5. RESTART FUNCTION
Equipped with a restart function which is convenient for “9 POINTS TEST” before operation. The conveyor belt restarts at regular interval without pressing the start button after detection. This makes the operation smooth.
6. FOOT SWITCH
Equipped with a foot switch as standard equipment. It is useful for starting the conveyor belt without using hand.
7. MACHINE OPERATION HISTORY
Equipped with a large capacity memory, enabled the machine operation history to be recorded (up to 800cases).Utilizing the history, it is possible to manage the needle detection operation. | | STANDARD | PRODUCT GUIDE , COUNTER | | OPTION | - | | | | | 青木公司服務Service: | | 我們?yōu)槟貍溆?span lang="EN-US">24小時緊急服務電話全天候待命，一旦您購買的設備發生故障或使用中出現的問題，我們將時間為您電話解決或在最短的時間內趕到現場解決問題，保證您的生產不受影響。青木公司售后技術專線0- | | 青木公司技術Technology： | | 我們擁有國內技術力量及經驗豐富的專業人員，售后服務完善，配件庫存充足。 | | 青木公司實力Strength： | | 我們堅信,良好的服務是建立在齊全的產品及充裕的庫存基礎上的，因此,我們建立了龐大的庫存?zhèn)}庫及完善的服務流程,相信你所需要的羽島設備都能在我們的庫存里找到.請放心使用我們提供的羽島設備。您將得到我們優質的服務,同時將會得到青木專業的技術支撐！感謝您的支持！ |  
檢測塊 檢測片 檢測桶  
啟動開關 
青木AOKI檢品燈 | 上海青木實業發展有限公司提供羽島HASHIMA國內最的專業技術 支持，檢針機的培訓、維修、點檢、保養服務，并出具點檢報告書！
|      هشيمة إبرة الكاشف 하시마 니들 탐지기 เครื่องตรวจจับเข็ม Hashima Hashima İğne Dedektörü 羽島の検針 Hashima kim Detector Hashima Detector de agujas Хашима иглы детектора 羽島檢針機 |
「検針履歴出力機能」パンフレット(PDF形式)
